Cerberus x

Cerberus x DEFAULT

Handle Kits and Fan Mounting Brackets

Motherboard
  • Extended ATX / E-ATX / EATX (305mm × 335mm max)
  • ATX (305mm × 244 mm)
  • Mini-DTX (203mm × 170 mm)
  • Mini-ITX (170mm × 170 mm)
CPU Air Coolers AIO Liquid Cooler Support
  • Single Radiator Options
  • 1x 120mm radiator in bottom or front
  • 1x 140mm radiator in bottom or front
  • 1x 240mm radiator in bottom
  • 1x 280mm radiator in bottom [placement may be difficult, depends on motherboard and radiator]
  • Dual Radiator Options
  • 2x 120mm or 140mm radiators in bottom, or mix of bottom/front.
  • 1x 280mm radiator in bottom w/ 25mm fans + 1x 120mm or 140mm radiator in front of case
  • [280mm radiator placement may be difficult, depends on motherboard]
  • 2x 240mm x 27.5mm thick radiator in front / bottom + 25mm fans on both
  • 2x 240mm x 30mm thick radiator in front / bottom with 15mm thick fans on both
  • Thickness of radiator on front of case + thickness radiator fans + GPU length must equal less than 330mm total.
  • Recommended to purchase a low profile USB 3.0 motherboard header adapter for 280mm radiators in bottom of case.
  • Some of these recommendations might not work with EATX motherboards.
Fan Mounting
  • One 120mm x 15mm fan on top fan bracket (120mm x 25mm possible but depends on motherboard)
  • Two 140mm fans in bottom
  • 120mm x 240mm radiator in front + 120mm x 240mm radiator in bottom (with SFX rear plate or ATX rear plate)
  • Slim 15mm fans behind front panel
GPU / PCIe Cards Storage
  • (2x) 2.5" SSD/HDD mounting points on base chassis
  • Optional bracket(s) for additional 2.5" SSD/HDDs
  • Optional bracket(s) for additional 3.5" HDDs
  • Brackets can be used simultaneously for a flexible combination of 3.5" and 2.5" drives
Front Panel I/O
  • (2x) USB 3.0 Ports
  • (1x) Momentary Switch / Power Status LED (Ring Shape, White)
Power Supply
  • ATX
  • Supports all lengths
  • SFX / SFX-L
Material
  • Chassis
  • ASTM-A-653 G30 Zero Spangle 20 Gauge Galvanized Steel
  • Side Panels
  • ASTM B209-10 5052-H32 0.080" Aluminum Sheet
  • Handle
  • Machined B308M-10 Aluminum-Alloy 6061-T6
  • Feet
  • Cavity Molded 75 Durometer Nonmarking Black SBR
  • or
  • Machined B308M-10 Aluminum-Alloy 6061-T6
Finish
  • Fine texture powder coated chassis and panels
  • Unpainted chassis, panels, or parts available on request (for DIY paint jobs)
  • Optional custom powder coat finishes, MOQ 25 units
Branding
  • Case is unbranded on interior and exterior of chassis.
  • Optional logo screen printing (full color) on front panel for business customers, MOQ 5 units
Dust Filters
  • Available for purchase from www.demcifilter.com
  • Dust filters are not designed or supported by Sliger
Case Dimensions (HxWxD)
  • 14.97" x 6.78" x 14.09" (counting feet and side panels)
  • 380mm x 172mm x 358mm
  • Shipping Box: 18.25" x 16.25" x 11.25"
Volume
  • 23.40 Liters
  • Volume includes case feet and all protruding flanges
Weight
  • Chassis: 4.55 lbs
  • Hardware Kit: 0.55 lbs
  • Panels: 4.30 lbs
  • SFX Internal Kit: 0.70 lbs
  • SFX Kit: 0.30 lbs
  • ATX Kit: 0.25 lbs
  • Handle Kit: 0.70 lbs
  • 3.5" HDD Kit: 0.40 lbs
  • 2.5" SSD Kit: 0.10 lbs
  • Packaging: 4.35 lbs
Warranty
  • Case
  • 5 Year Warranty [Chassis, USB cables, Power Button, Power Cable]
  • Liquid Coolers & Fans
  • 3 Year Warranty
  • Please see our warranty policy for additional conditions, exclusions, and limitations.
Homologation
  • HTS Tariff Code
  • 8473.30.00.02
  • Country of Origin
  • United States of America Rev Control
    • 1.0 (11/28/17 - 2/9/18)
    • Initial Release
    • 1.1 (2/16/18 - 5/14/19)
    • Removed flange from top panel bracket below middle ballstud that contacted hinge bracket.
    • Ballstud clips changed to 0.017" thick steel (fixes "hard to remove panels" issue)
    • Changed all 4-40 assembly hardware to rivets on top and bottom chassis inner frame assembly.
    • Fixed various interference and tolerance issues.
    • Power switch now has labeled connector terminals.
    • Discontinued Half Window / Half Vented panel option.
    • Added Full Window panel option.
    • Added Wood Top Panel options.
    • Added Chrome Handle and Chrome Feet option.
    • Discontinued Ecru Beige color option. (available until out of stock)
    • 1.2 (5/14/19 - 8/24/21)
    • Replaced all remaining 440 thread hardware with metric M3.
    • Modified chassis SSD cutout for ease of access.
    • Modified cutout on back of case for easier access to CPU cooler mounting and some M.2 slots.
    • Discontinued Wood Top panels.
    • Discontinued Carmine Red color option. (available until out of stock)
    • 1.3 (8/25/21 - *)
    • Added USB C options
    • Removed non-vented side panel options
    • Updated Black and Chrome Handle to Handle V2
    • New User Manual
Sours: https://www.sliger.com/products/cases/cerberus_x/

Sliger Cerberus X (ATX)

Motherboard supportExtended ATX / E-ATX / EATX (305mm × 335mm max)
ATX (305mm × 244 mm)
Mini-DTX (203mm × 170 mm)
Mini-ITX (170mm × 170 mm)CPU Liquid Cooling

Single Radiator Options

1x 120/140mm radiator in bottom or Front
1x 240/280mm radiator in bottom

Dual Radiator Options

2x 120/140mm radiators in bottom or bottom/front
1x 240/280mm radiator in bottom + 1x 120/140/240mm radiator in front
2x 240mm radiators in bottom/front

Thickness of radiator on front of case + thickness radiator fans + GPU length must equal less than 330mm total. 280mm radiator clearance depends on motherboard and radiator shape.

Click here for full AIO Compatibility Spreadsheet [Google Docs]

DISCLAIMER: The compatibility spreadsheet is created and maintained by the Reddit community. Density Labs s.r.o. is not liable for any possible errors or inconsistencies in the spreadsheet.

CPU Air Coolers-with SFX Internal Kit: 149mm with side hinge bracket removed, 142mm with the side hinge bracket installed
-with SFX Rear Plate: 75mm max height
-with ATX Rear Plate: 48mm max heightFan Mounting

Chassis:

up to 2x 120mm fans in front, 2x 120/140mm fans in bottom, 1x 120/140mm fans on side hinge brackets

Handle Mount Bracket:

1x 120mm x 15mm slim fan

Top Mount Bracket:

2x 120mm x 15mm thick fans recommended for SFX PSU systems

1x 120mm x 15mm thick fan recommended for ATX PSU systems

Rear wall:

1x 80/92mm fan (when using front mounted SFX power supply)

Fans over 140mm in size are not supported.

GPU / PCIe Cards8x PCIe slot openings

Maximum card height: 152mm (bottom of card PCIe tab to top of power connector wires)
Maximum card length: 330mm

Storage(2x) 2.5″ SSD/HDD mounting points on base chassis

Optional brackets for dual 2.5″ SSD/HDDs
Optional brackets for quad 2.5″ SSDs
Optional brackets for single/dual 3.5″ HDDs

Power SupplySFX, SFX-L or ATX with respective mounting bracketFront Panel I/O2x USB 3.0 Type A to 19-Pin Motherboard HeaderMaterial and Finishgalvanized steel, aluminum, rubber feetCase Dimensions (HxWxD)380mm x 172mm x 358mmRev Control28.11.2017 – 1.0 Initial release
16.02.2018 – 1.1 fixed various interference, half-window panel discontinued, changed 4-40 assembly hw to rivets
14.05.2019 – 1.2 replaced 440 thread to M3, modified chassis SSD cutout, modified cutout behind CPU, discontinued wooden top panels and red color optionsScope of deliveryComputer case, mounting hardware with 5x PCIe slot covers, black SBR case feet, selected PSU mounting bracket, optional accessories as per customer’s orderDocuments and build recommendationsDATASHEET in PDF formatProduct manualCerberus and Cerberus X Build Guide ENGLISH
Sours: https://www.density.sk/product/cerberus-x/
  1. Holey moley reviews
  2. Cosmoprof saturday hours
  3. Trolls wow

Gintama69 said:

1. Side Panel: Vented or Windowed(Acrylic)
Vented side panel would be bit better for CPU and GPU thermals.
Windowed side panel would look better for RGB RAM and GPU, and I don't think there'll be any thermal issue even with windowed side panel.
Q1: Would you get the Vented side panel or Windowed side panel?

2. Top Panel: Handle & Colour
Cerberus X can have optional handle on the top of the case(like Lian Li TU150/TU150) but the handle doesn't fold down like the one on TU150. Also you can install two 80mm fans on top of the case if you don't use the optional handle.
Q2: Would you get the Handle for the case? If yes, then in Black or Chrome?
Q3: Would you get the top panel in Matte White colour(to match with the rest of the case) or get it in Black colour(might go better Black Handle)?


Specs for the build(not confirmed):
CPU: Intel i9 11900K
HSF: Noctua NH-C14S
M/B: Gigabyte Z590 Aorus Ultra
GPU: Gigabyte RTX3060Ti Aorus Master
RAM: 32GB(4x 8GB) G.Skill Trident Z RGB 3600C16
SSD: 2TB Samsung 970 EVO Plus
Case: Sliger Cerberus X (Matte White with SFX Internal)
PSU: Corsair SF750 SFX Platinum
FAN: 1x 120mm RGB Fan(Exhaust)

Click to expand...


Q1: I prefer airflow to looks, and you're looking at a hot processor to boot. With midtower or larger you can do away with side vents, but in a small case, I feel like it'll help to have better airflow with vented. Plus the NH-C14S is a top flow cooler IIRC, and side vents allow straight airflow channel to the cooler. Keep in mind, 11900K is a hot chip, befitting its high-end tier and TDP. Yeah, you can't see the lights inside, but seeing as we're having a high-end build I'd say airflow > aesthetics.

Q2: Personally won't, since I don't move PCs around. Your friend might, and I can see how handle helps a lot in that scenario. Otherwise, airflow >>> handle. You can fit an extra 80mm on the rear fan mount for extra exhaust also. In my experience, exhaust there is slightly better over no fan (only vents) and much better than intake. YMMV, case airflow varies by model and cooler/airflow setup.

Q3: If I were to get the handle, I'd rather have it matching the rest of the case, i.e. same colour, matte or gloss notwithstanding. Matte is better since I imagine glossy plastic is fingerprint magnet.

Another point in mind: if the system is moved often, AIO is better IMO since we're not putting (significant) weight on the motherboard. NH-C14s isn't exactly a beefy cooler like the D14/15 is, but I feel safer with an AIO for a system that moves around a lot.
That said, it seems like if you opt for the 240mm AIO it'll eat up the entire space up front. I expect slightly worse temps for GPU, at least from what I've seen in typical cases. Smaller form factors might suffer more due to limited airflow and space to dissipate the heat. Still, I'd wager it won't strangle the GPU that badly, at worst just limited boost clocks.

If 80mm fan is to be mounted, I suggest getting silent ones. The cheapo 80mms are loud AF. 120mm Chinese sub $5 ones can be silent and get someairflow. 80mm ones? Nope.

 

Sours: https://forums.tomshardware.com/threads/sliger-cerberus-x-build-which-options-would-you-go-for.3704765/
Sliger Cerberus X: The Compactest ATX Case?

.

X cerberus

.

Sliger Cerberus X: The Compactest ATX Case?

.

You will also like:

.



123 124 125 126 127