Beyerdynamic headband replacement

Beyerdynamic headband replacement DEFAULT

VEVER Replacement Headband Cushion Pad Repair Parts for Beyerdynamic DT770,DT860, DT880,DT880PRO,DT990 Headphones (with VEVER Logo Package)



Reviewed in the United States on September 27, 2021

Stacks up against the original.

I used this on my Beyedynamic MMX 300 headset.As others have said, comfort is comparable to if not better than the original -- I can't speak to the longevity of it just yet, but they didnt skimp with the padding. With any luck it'll last me another 6 years. Getting it on was a little bit of a battle, but I can't complain... the original is just as hard to install.As stated by others, though, the ends do flare out a bit. It doesnt seem to be an issue outside of being ugly... but I'm not rocking bulky cans because they're stylish.... Read more...


Reviewed in the United States on September 20, 2021

You get what you pay for

The headband was a pain to install, but I assume thay due to the tight fit with the frame and to keep it in place. The padding is nowhere near as nice as the original headband. It has a very soft feel to it, offering little resistance. This makes the headphones dig into your head as the headband’s padding just compresses under the headphones weight over your head. As I am writing this i can feel the headphones pressing on top of my head. This was never an issue with the original headband. I’ll give them a week to see if it gets better, but I doubt it. Will probably revert to the original headband although it is starting to fall apart.Look elsewhere for a headband, this aint it.... Read more...


Reviewed in the United States on August 19, 2021

Great fit

Compared this with Geekria Protein Leather Headband for a DT880 Pro. This one had a much better fit and the material felt higher quality. It was much easier to snap the buttons shut than for the Geekria. Both feel equally comfortable. As another reviewer mentioned the corners do stick out a tiny bit because the button placement isn't at the very end of the material. But the Geekria band was too long and looked worse overall because it had to be scrunched lengthwise to get the buttons to clasp shut. I have used Geekria earpads for a couple years and the leather disintegrated completely - the Geekria band seems to be made of the same material. A button on the Geekria band broke during careful installation. I'm keeping this one.... Read more...


Reviewed in the United States on April 23, 2021

Super Comfy, but Ok Snap Placement

Don't miss the same Minor detail I did, I would have picked a different product if I noticed it first. It is comfy, and it does fit perfect on my Bayerdynamic MMX 300. The quality is great. But the two details I didn't notice and I wish I did was that the snaps on the end do not go to the corner. I didn't think about it until I put it on, and notice that the headband corners kind of flare up on the headphones. You can see the flare out on my first photo. In my second photo, compare the position of the edge snaps between the original headband and the replacement. The other detail, which is not a mark against this headband, it's just something I should have noticed are that the snaps are Chrome, as compared to my original snaps being black. I'm not going to return it because functionally it's perfect, and it's not like anybody sees me in these, so the flare out isn't a huge deal, just minus one star.... Read more...


Reviewed in Singapore on August 5, 2020


Used it for my Beyerdynamic DT 770 PRO, replaced the old cushion pad that was flat and causing a minor headache when used for longer duration. Fits to a T and comfortable now.... Read more...


Reviewed in the United States on May 2, 2020

Fits my BD T1 perfectly! Great replacement!

Fits my BD T1 (2nd Gen) perfectly.First I had to cut off the original cover layer that was falling appart and leaving black specks of material everywhere.Then I had to remove the extra foam cushion (factory install) that was on it (was a bit sticky but came off cleanly).After that it took me like 2 minutes to put on the replacement (it is a nice tight fit). No tools required (ok... A scissor)It fits like a glove!Easy install, I would recommend it to my friends.... Read more...


Reviewed in the United States on May 6, 2019

Almost doesn't fit my DT770

Bought to replace the completely disintegrated original headband pad on my DT770s. It takes tremendous effort to stretch the two halves far enough so that they can snap together. I almost rated this 1-star for not fitting at all, but fought with it for a while and did eventually get it together.... Read more...


Reviewed in the United States on January 20, 2019

Must remove old head pad first.

This worked perfect for my Beyerdynamics DT880 headphones. My original head pad became sticky somehow and kept leaching out a sticky substance. I simply removed the left and right adjustment sliders then removed the old pad ( basically just separates from its center point along a visible seam). There is also a you tube video of this. Wrapped the new replacement pad, snapped in place and good to go. A really great, comfortable product and looks good too.... Read more...


Reviewed in the United States on September 24, 2018

Perfect for DT880

Product fit perfectly on my DT880 cans! I read one reviewer somewhere on here that it's way too tight and yadda yadda, but he must've been smoking something good that night. It's really soft and actually slightly better than the stock ones that come on them. I have the DT770 and MMX300 and this headband holds its own. I happened to buy the DT880 used and the previous owner installed this adhesive pad that nearly tripled the thickness and it was horrendous. After learning the shipping cost on an original from Beyerdynamic themselves I decided to give this a shot, and I'm really glad I did. Makes me want to upgrade my 15yr old DT770 since that headband has seen some hours! Definitely don't be afraid to try this out on your cans. You'll be happy you did.... Read more...


Dekoni Audio Replacement Headband for Beyerdyamic Headphones

To complement their proven range of excellent ear pads, Dekoni Audio have been working to expand their product range to encompass all aspects of comfort when it comes to a users listening experience. Dekoni have now released a series of replacement headbands, which promise to become the go-to option when your old headband needs replacing.

These replacement headbands are a purpose-built solution to uncomfortable, worn out headbands on the Beyerdynamic line of headphones.

Designed with Dekoni Choice Leather and Choice Suede options, you will find a supple, form-fitting cushion to balance the weight of your headphones and keep comfort to a maximum. Both materials are fully Vegan, and offer a premium feel and look. In the design process, Dekoni decided to utilize their medium density foam as found in the Earpadz line, to help allow the replacement heandband to more quickly mold to your head, and to distribute the weight of the headphones evenly.

This replacement headband fits all Beyerdynamic DT Series models, plus MMX, Custom One, Custom Studio and more.


  • Choice Leather or Choice Suede material options (both fully Vegan).
  • Supple, flexible, form-fitting cushion.
  • Made from medium-density memory foam.


This replacement headband fits the following headphone models:

  • Beyerdynamic DT Series
  • Beyerdynamic DT 770
  • Beyerdynamic DT 880
  • Beyerdynamic DT 990
  • Beyerdynamic MMX 300
  • Beyerdynamic Custom One Pro
  • Beyerdynamic Custom Studio Pro


More Information

  1. Crystal chandelier costco
  2. Tartan curtains blue
  3. Best pill speaker
  4. Marshall bluetooth speaker app
  5. Unlock palm phone


SKU: HB-DT78990Categories: Beyerdynamic, Custom One Pro, Custom Studio Pro, Dekoni Choice, Dekoni Choice Leather, Dekoni Choice Suede, DT770, DT880, DT990, MMX300, Parts and Accessories


HEADBAND HPDekoni is proud to deliver a purpose-built solution to uncomfortable, worn out headbands on Beyerdynamics line of headphones.

Designed with our Choice Leather and Suede, you’ll find a supple, form-fitting cushion to balance the weight of your headphones and keep comfort to a maximum.

Our Choice Suede and Leather bands are fully vegan, and offer a premium feel and look.

In the design process, Dekoni decided to utilize our medium density foam found in the Earpadz line to help allow the band to more quickly mold to your head and distribute the weight of the headphones evenly.

Additional information

Weight.5 lbs

Choice Leather, Choice Suede

How to repair broken Beyerdynamic DT990 Headband Slider plastic cover


Replacement beyerdynamic headband


How to repair broken Beyerdynamic DT990 Headband Slider plastic cover


You will also be interested:


367 368 369 370 371