Tile trim outside corner

Tile trim outside corner DEFAULT

Edging & Outside Wall Corners

RSchluter®-JOLLYSchluter®-JOLLY

For Walls / Edging & Outside Wall Corners

Finishing and edge-protection profile for outside wall corners and edges

Schluter®-JOLLY

Schluter®-JOLLY is a finishing and edge-protection profile for the outside corners of tiled surfaces on walls. The vertical wall section of the profile provides a decorative finish and protects adjacent tiles. Other applications include transitions for dado coverings such as carpet, natural stone, or cold-cured resin coatings.

Product InformationProduct table

View Product Details
Schluter®-FINEC
Schluter®-FINECSchluter®-FINEC

For Walls / Edging & Outside Wall Corners

Finishing and edge-protection profile with a minimalist design

Schluter®-FINEC

Schluter®-FINEC is a finishing and edge-protection profile for the external edges of tile coverings or mosaics. The finishing leg of the profile protects the covering edges from mechanical damage, and features a very slim, elegant reveal. Available in anodized aluminium in all TRENDLINE colors as well as stainless steel; FINEC is ideal for protecting mitered edges, while creating a discreet trim for a minimalist design.

Product InformationProduct table

View Product Details
Sours: https://www.schluter.com/schluter-us/en_US/Profiles/For-Walls/Edging-&-Outside-Wall-Corners/c/P-FW-EOWC

Schluter®-RONDEC

1. Select the profile according to tile thickness and format.

2. Using a notched trowel, apply thin-set mortar to the area where the profile is to be placed. If the RONDEC profile is to be used as edging for an outside wall corner, finish tiling one wall first; then trowel thin-set mortar over the corner area of the second wall.

3. Press the perforated anchoring leg of the profile into the mortar and align.

4. Trowel additional thin-set mortar over the perforated anchoring leg to ensure full coverage and support of the tile edges.

5. Solidly embed the tiles so that the tiled surface is flush with the top of the profile; the profile should not be higher than the tiled surface, but rather up to approx. 1/32" (1 mm) lower.

6. Set the tile to the integrated joint spacer, which ensures a uniform joint of 1/16" - 1/8" ( - 3 mm). With the stainless steel profiles, leave a space of approximately 1/16" - 1/8" ( - 3 mm).

7. Fill the joint completely with grout or setting material.

8. Work with materials and tools that will not scratch or damage sensitive surfaces. Setting materials must be removed immediately, especially from aluminum.

Note: Matching corners are available for RONDEC. Corners and end caps are held in place with thin-set mortar. Fill the ends of the profile with thin-set mortar prior to inserting the accessories. Connectors are held in place with a friction fit. Insert the connector into the profile approximately half the length of the connector piece and connect the adjacent profile.

For installation of RONDEC sink corners (/2" radius):

1. Insert the sink corner connectors into the profiles. Apply thin-set mortar to the substrate and firmly embed the profiles into the mortar.

2. Using a margin trowel, fill the back of the sink corners with thin-set mortar. Install the corners over the connectors and align. 3. Setting materials must be removed immediately

Sours: https://www.schluter.com/schluter-us/en_US/Profiles/For-Walls/Edging-&-Outside-Wall-Corners/Schluter%C2%AE-RONDEC/p/RONDEC
  1. Sagittarius daily
  2. Husky breeders vt
  3. Tackle warehouse jerkbaits
  4. Target nampa
  5. Aragorn costume design
Schluter Systems - logo

Characteristics

Material
aluminum
Use
for tiles, outside corner

Description

Schluter-ECK-E is a stainless steel edging profile for outside corners of tiled walls that offers excellent edge protection against mechanical stresses; for example, in industrial kitchens and hospitals. In addition, the profile produces a radiused edge along the outside wall corner for a clean, decorative finish. Schluter-ECK-E features trapezoid-perforated anchoring legs that are secured in the mortar bond coat beneath the tile. Schluter-ECK-E is especially suitable for areas where strict hygienic requirements must be met (e.g., hospitals, industrial kitchens, clean rooms, washrooms, and food-processing plants) and where aesthetic appeal is desired. Schluter-ECK-E can be combined with the cove-shaped stainless steel profiles, Schluter-DILEX-EHK (for inside wall corners) and Schluter- DILEX-HKS (for floor/wall transitions).
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
Sours: https://www.archiexpo.com/prod/schluter-systems/producthtml
How To Tile Outside Corner - Step By Step - Shower Bathroom Tiling.

Schluter®-RONDEC

1. Select the profile according to tile thickness and format.

2. Using a notched trowel, apply thin-set mortar to the area where the profile is to be placed. If the RONDEC profile is to be used as edging for an outside wall corner, finish tiling one wall first; then trowel thin-set mortar over the corner area of the second wall.

3. Press the perforated anchoring leg of the profile into the mortar and align.

4. Trowel additional thin-set mortar over the perforated anchoring leg to ensure full coverage and support of the tile edges.

5. Solidly embed the tiles so that the tiled surface is flush with the top of the profile; the profile should not be higher than the tiled surface, but rather up to approx. 1/32" (1 mm) lower.

6. Set the tile to the integrated joint spacer, which ensures a uniform joint of 1/16" - 1/8" (1.5 - 3 mm). With the stainless steel profiles, leave a space of approximately 1/16" - 1/8" (1.5 - 3 mm).

7. Fill the joint completely with grout or setting material.

8. Work with materials and tools that will not scratch or damage sensitive surfaces. Setting materials must be removed immediately, especially from aluminum.

Note: Matching corners are available for RONDEC. Corners and end caps are held in place with thin-set mortar. Fill the ends of the profile with thin-set mortar prior to inserting the accessories. Connectors are held in place with a friction fit. Insert the connector into the profile approximately half the length of the connector piece and connect the adjacent profile.

For installation of RONDEC sink corners (1-1/2" radius):

1. Insert the sink corner connectors into the profiles. Apply thin-set mortar to the substrate and firmly embed the profiles into the mortar.

2. Using a margin trowel, fill the back of the sink corners with thin-set mortar. Install the corners over the connectors and align. 3. Setting materials must be removed immediately

Sours: https://www.schluter.com/schluter-us/en_US/Profiles/For-Walls/Edging-&-Outside-Wall-Corners/Schluter%C2%AE-RONDEC/p/RONDEC

Corner tile trim outside

Edging & Outside Wall Corners

RSchluter®-JOLLYSchluter®-JOLLY

For Walls / Edging & Outside Wall Corners

Finishing and edge-protection profile for outside wall corners and edges

Schluter®-JOLLY

Schluter®-JOLLY is a finishing and edge-protection profile for the outside corners of tiled surfaces on walls. The vertical wall section of the profile provides a decorative finish and protects adjacent tiles. Other applications include transitions for dado coverings such as carpet, natural stone, or cold-cured resin coatings.

Product InformationProduct table

View Product Details
Schluter®-FINEC
Schluter®-FINECSchluter®-FINEC

For Walls / Edging & Outside Wall Corners

Finishing and edge-protection profile with a minimalist design

Schluter®-FINEC

Schluter®-FINEC is a finishing and edge-protection profile for the external edges of tile coverings or mosaics. The finishing leg of the profile protects the covering edges from mechanical damage, and features a very slim, elegant reveal. Available in anodized aluminium in all TRENDLINE colors as well as stainless steel; FINEC is ideal for protecting mitered edges, while creating a discreet trim for a minimalist design.

Product InformationProduct table

View Product Details
Sours: https://www.schluter.com/schluter-us/en_US/Profiles/For-Walls/Edging-&-Outside-Wall-Corners/c/P-FW-EOWC
What is the best way to finish outside corner in tile shower

.

You will also like:

.



464 465 466 467 468